Tricity Bendix DH 102 D, Instruction Book

4

Filling with salt

Attention!
Only use salt specifically designed for use in 
dishwashers.
All other types of salt not specifically designed 
for use in dishwasher, especially table salt, will 
damage the water softener.
Only fill with salt just before starting a washing 
programme. This will prevent any grains of salt or 
salty water, which may have been spilled, 
remaining on the bottom of the machine, which 
may cause corrosion.

The salt container will require topping up periodically.

According to the model, an indicator reminds you when
filling with salt:

A) The salt cap has a refill indicator window in the centre. 

A green float is clearly visible when there is salt inside 
the container, and almost disappears when the salt has 
finished reminding you to add salt.

B) A salt indicator light on the control panel will come on 

when the salt has finished.

The salt indicator light on the control panel can 
remain illuminated for 2-6 hours after the salt has 
been replenished, assuming the dishwasher 
remains switched on. If you are using salts that 
take longer to dissolve then this can take longer. 
The function of the machine is not affected..

Do not worry if water over flows from the unit when filling
with salt, this is quite normal.

SR15

SR19

SR16

SR18

SR17

1. Unscrew the cap of the salt container.

2. Pour 1 litre of water inside the container 

(this is necessary only before filling with 
salt for the first time).

3. Using the funnel provided, pour in the salt 

until the container is full.

4. Remove any trace of salt on the screw thread 

or on the gasket.

5. Screw on the cap tightly.

SR11