Tricity Bendix TB 85 F, Operating And Installation Instructions

DESCRIPTION OF THE APPLIANCE

4

B

C

A

N S

0

6

5

4

3 2

1

A - Freezer controls
B - Compartments for freezing fresh foods
C - Compartments for frozen food storage

17

Printed on recycled paper

Door reversal

1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store food

in a cool place.

3. Gently lay the freezer on its back with the top held

away from the floor by 5-8 cm (2-3 inches) of

packing;

4. Remove the feet (3)
5. Remove bottom hinge (1).
6. Slide out the  door from pin (G), unscrew the

latter and then screw it down into the hinge

provided on the opposite side, after having

removed the small plugs which should then be

fitted on the opposite side.

7. Refit the door and bottom hinge (1) on the

opposite side.

8. Refit the feet (3) on the opposite side.
9. Unscrew the handle. Refit it on the opposite side

after having pierced the plugs with a punch.

Cover the holes left open with the plugs contained

in the documentation pack. 

Important

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdryer on a low setting.

D715 PIED/M

1

2

3

G

PR220