background image

20

Guarantee Conditions

Standard guarantee conditions

We, Tricity Bendix, undertake that if, within 12 months
of the date of the purchase, this Tricity Bendix appliance
or any part thereof is proved to be defective by reason
only of faulty workmanship or materials, we will, at our
option, repair or replace the same FREE OF ANY
CHARGE for labour, materials or carriage on condition
that:

The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.

The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.

The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.

All service work under this guarantee must be
undertaken by an Tricity Bendix Service Force Centre.
Any appliance or defective part replaced shall become
the Company’s property.
This guarantee is in addition to your statutory and other
legal rights.
Home visits are made between 

8.30am

and 

5.30pm

Monday to Friday. Visits may be available outside these
hours in which case a 

premium

will be charged.

Exclusions

This guarantee does not cover:

Damage or calls resulting from transportation,
improper use or neglect, the replacement of any light
bulbs or removable parts of glass or plastic.

Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.

Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.

Products of Tricity Bendix manufacture which are
NOT marketed by Tricity Bendix.

European guarantee

If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:

The guarantee starts from the date you first
purchased your product.

The guarantee is for the same period and to the same
extent for labour and parts as exists in the new
country of use for this brand or range of products.

The guarantee relates to you and cannot be
transferred to another user.

Your new home is within the European Community
(EC) or European Free Trade Area.

The product is installed and used in accordance with
our instructions and is only used domestically, i.e. a
normal household.

The product is installed taking into account
regulations in your new country.

Before you move please contact your nearest Customer
Care Centre, listed below, to give them details of your
new home. They will then ensure that the local Service
Organisation is aware of your move and able to look
after you and your appliances.
France

Senlis

+33 (0) 344 62 29 29

Germany

Nurnberg

+49 (0) 800 234 7378

Italy

Pordenone

+39 0434 39 4700

Sweden

Stockholm

+46 (0) 8 672 53 90

UK

Luton

08705 950 950

Ireland

Dublin

+353 (0) 1 4090751

Please note that a valid purchase receipt or

guarantee documentation is required for in-

guarantee service calls.

For Customer Service in Ireland please contact us at the

address below:
Tricity Bendix - Electrolux Group (Irl) Ltd
Long Mile Road - Dublin 12
Republic of Ireland

Tel: +353 (0)1 4090751

Email: service.eid@electrolux.ie

Summary of Contents for TBWM 1110





























Reviews: