4
5
Ground LED
When illuminated, it indicates that the Product is correctly grounded.
If not illuminated, there is a grounding problem and you must contact an
electrician to properly ground the socket. Surge protection will not work
with an improperly grounded outlet.
Surge LED
When illuminated, it indicates that the surge protection is functioning
normally.
If this LED illuminates red or extinguishes at any time, the Product was
sacrificed to protect your devices and must be replaced.
6
7
Switched Outlets LED
When lit, it indicates that the Outlets are powered.
Resettable Circuit Breaker
Provides protection for all Outlets on the product. If no devices are
powered or LEDs lit, press the circuit breaker to activate power.
8
Always On Outlets
Outlets remain ON all the time.
9
< > Outlet
The Outlet includes current sensing and senses the state of the TV.
IMPORTANT
THE TV MUST BE PLUGGED INTO THIS OUTLET
Product Overview
4 5 6
7
9
8
1
2
3
1
2
3
InfraRed (IR) Sensor
The IR Sensor is connected to the powerstrip via the RJ 11 port - marked
“sensor”.
Mount the IR Sensor on the underside of the TV, near to the IR receiver on
the TV. Typically located next to the TV power on/off button.
The IR Sensor must be located within line of sight of where you normally
use your remote controls.
Power Connection
The Product must only be plugged into a grounded receptacle for surge
protection to operate correctly.
All connected devices should be plugged directly into the Product. Use of
an extension cord, adaptor or other powerstrip in conjunction with the
Product will void all warranties.
Sensor / RJ11 Port
Plug the IR Sensor into this port.
There will be a soft audible ‘click’ when the connector is inserted correctly.
www.tricklestar.com
Advanced Pow
Advanced
Pow
Outlet
7
