600CC-US-W
www.tricklestar.com
TEMPERATURE CONTROLLER
600CC-US-W
INSTRUCTIONS (ENGLISH)
Introduction
Thank you for purchasing this TrickleStar
TM
product. This product
provides enhanced controls to reduce wasteful energy
consumption of heating and cooling appliances, which do not
include temperature controls. This product is suitable for the
control of devices such as electrical heaters, heating fans, portable
air-conditioners and cooling fans.
LCD Display
Status Indication
Off
Product is OFF
Green
Product is ON and Control Socket is ON
Red
Product is ON and Control Socket is OFF
Celsius / Fahrenheit Display
To switch between Celsius and Fahrenheit, switch the product
OFF using the
button if not already OFF (Status Indicator
OFF). Press
and
buttons simultaneously for 3 seconds to
switch display between Celsius and Fahrenheit.
Factory Default Setting
The factory default settings are:
Cooling Mode and a temperature “SET POINT” of 20
°C / 68°F
.
Application / Installation
Plug the product into a wall outlet and plug an appliance to be
controlled into the
Control Socket.
Select Cooling / Heating Mode
To switch between Cooling
and Heating Mode , switch the
product OFF using the
Button if not already OFF (Status
Indicator OFF).
Press the
button and
button simultaneously for 3 seconds to
switch between Cooling and Heating Modes.
Cooling Mode Setup
1.
Select Cooling Mode.
2.
Press
button to switch product ON.
3.
Press
or
button to adjust to the required temperature
Set-point.
Cooling Mode Operation
When room temperature
is higher than the Target Set-point
, the Status Indicator will illuminate GREEN and the Control
Socket will switch ON within 3 min.
When room temperature
is lower than the Target Set-point
, the Status Indicator will illuminate RED and the Control
Socket will switch OFF within 3 minutes.
Heating Mode Setup
1.
Select Heating Mode.
2.
Press
button to switch product ON.
3.
Press
or
button to adjust the temperature Set-point.
Down Button
On / Off Button
Status Indicator
Reset Button
LCD Display
Control Socket
Up Button
Humidity Sensor
RM
°c
°
c
°
F
SET
25 6
20
.
Room Temperature
Cooling Mode
Heating Mode
Target Temperature
Set-point
Set Temperature
Set-point
Celsius
Fahrenheit
2
1
3
4
5
6
SET
Heating
Cooling
SET
SET
