3. To turn On/Off DC output
i) Turn on DC output: Press and hold the DC power button for about
2 seconds to turn on the DC output for the PowerStation1500. The
corresponding LED indicator will light up and the display screen will show
“DC ON”.
ii) Turn off DC output: Press and hold the DC power button for about 2 seconds
to turn off the DC output of the PowerStation1500. The corresponding LED
indicator will turn off and the display screen will show “DC OFF”.
4. Storage Maintenance
•
Make sure to fully charge your PowerStation1500 before storage.
•
Switch off all the power buttons.
•
Clean the PowerStation1500 with dry cloth only.
•
Do not use gasoline, volatile oil, thinner, kerosene, etc. which may dissolve the
resin.
•
Keep the PowerStation1500 unit in a cool and dry place, within the
temperatures of 32°F to 104°F (0°C - 40°C) and avoid direct sunlight.
•
Fully charge the PowerStation1500 at least once every three to six months to
maintain optimum performance.
The PowerStation1500 is able to function without charging for up to two years.
However, several charge cycles may be required to fully restore its battery.
If the PowerStation1500 remained idle for a long time and does not work even after
several charge attempts, please contact our Customer Service Center for further
assistance.
Take Note:
1. Before turning on the AC/DC output, make sure to turn on the PowerStation1500.
When the PowerStation1500 is charging, the display is turned on to show
charging progress, but the system is not running. You have to turn on the
PowerStation1500 first before turning on the AC/DC output.
2. It is not recommended that you charge and discharge the PowerStation1500
simultaneously to protect the battery lifespan.
3. When the PowerStation1500 is powered on, but not in use (the unit is not charging
or discharging), the display screen and power will turn off automatically after 60
seconds of inactivity.
