background image

www.tricklestar.com

The best way to save energy is to stop wasting it.

TM

 

 

7 OUTLET TIER 2 ADVANCED 

POW 

ZIGBEE

®

 MULTI-SENSOR

Premium quality, fireproof surge protection that reduces standby and active power waste from electronics

OVERVIEW

The Tier 2 ZigBee

®

 Multi-Sensor Advanced Pow (APS+) 

provides premium quality surge protection and reduces the amount 
of standby and active power wasted by electronics.

The APS+ is designed for use with set-top box systems.

The APS+ includes a low voltage RJ11 port which supports the 
connection of a Zigbee

®

-enabled multi-sensor that senses radio 

frequency (RF), infrared (IR), and motion.

The APS+ includes advanced power measurement and patented 
auto-threshold detection. This allows the APS to accurately support 
all types of televisions from old to new high efficiency types. It 
provides automation to reduce wasteful standby and active power, 
and it is suitable for TV/home theater applications.

In addition to standard power switching, the APS+ also supports “soft 
switching” via high-level CEC commands from the multi-sensor to an 
HDMI port on the TV; this feature is known as TAV-Link and will result 
in placement of connected HDMI devices into a power-saving state 
by high-level commands.

KEY FEATURES

7 Outlets
       2 Always On Outlets (1 outlet transformer spaced)
       5 Switched Outlets (1 outlet transformer spaced) 
15A resettable circuit breaker
Auto threshold detection
Intelligently adjusts to new equipment
True RMS power sensing
72,000 Amps/1080 Joules
Ceramic surge protection
Low-voltage, optically-isolated RJ11 input
LED status indication (ground, surge status, switched)
<40dB noice filtering
Angled space saver plug
ZigBee enabled multi-sensor
CEC TAV-Link function 

FIREPROOF SURGE PROTECTION

Traditional surge suppression products use standard MOV (metal oxide 
varistor) components. TrickleStar Tier 2 APS+ incorporates advanced 
surge protection technology. The MOVs are encased in  ceramic and 
are capable of suppressing more energy and dissipating heat faster 
than traditional MOVs. More importantly, the ceramic casing is fireproof 
and therefore is capable of preventing fire during surge conditions.

PRODUCT WARRANTY

10-year product warranty
$20,000 connected equipment warranty

TS1811

ADVANCED 

POW

TIER 2 ZIGBEE MULTI-SENSOR

Summary of Contents for TS1811












Reviews: