background image

Music Mode

To change the countdown timer, press and hold the button  

on the side of the sensor for 10 seconds until the red LED 

lights up. Then press:
•   Once for 30 minutes (IR + motion sensing)
•   Twice for 60 minutes (IR + motion sensing)
•  Three times for 120 minutes (IR + motion sensing) 
•   Four times for 60 minutes (IR-sensing only)
•  Five times for 120 minutes (IR-sensing only)
After the countdown timer is set, the LED will flash the 

same number of times the button was pressed to indicate 

the setting.

The sensor has a default buzzer that will sound at both 10 

minutes and 3 minutes prior to shutdown. To disable the 

buzzer, press and hold the button on the side of the sensor 

for 10 seconds until the red LED illuminates, and then press 

the button six times. The red LED will flash six times to 

confirm that the buzzer has been disabled.

Press any button but the power button 

on any IR remote to turn on the 

switched outlets.

Press power on all music-related 

devices to turn them on.

al

ways on

tv

ga

me c

onso

le

amplif

ier

dvd

subwoofer

switched

cable box

dvr

sur

ge

gr

ound

switched

Step 1

Step 2

If the TV is not switched on at any time during Music Mode, all of the switched 

outlets will turn off after eight hours. If the TV is turned on during Music Mode, the 

APS+ will switch to TV Mode and follow the countdown timer.

Changing the Countdown Timer

Disabling the Buzzer

Note

www.tricklestar.com

BLUETOOTH

® 

AV ADVANCED POW

Press any button but the power button 

on an Infrared (IR) remote to turn on 

the switched outlets. You will hear a 

click as power is supplied to the 

switched outlets.

Note: Not all remotes are IR and you 

must use an IR remote in this step. If 

you're using an IR remote, the sensor 

will blink red each time you press a 

button.

Press the power on an IR remote to 

turn on the TV.

TV Mode

ON

Use peripheral remote controls to 

power on other electronics as 

needed.

Step 1

Step 3

Step 4

Step 2

When finished watching TV, use the 

IR remote to turn it off. All switched 

outlets will automatically turn off 

within 1 minute.

OFF

Operating Modes and Settings

Summary of Contents for TS1816















Reviews: