8
6
Fig 8-A
5. Press Next once your Sensor LED is blinking to complete the pairing process. This will initiate a scan
function and the Thermostat will scan for Sensors in range. Sensors that are detected will be listed by
their MAC addresses. Select the correct Sensor from the list of available Sensors for pairing. Note: It
may take up to 30 seconds to detect and pair a new Sensor.
6. Once your Sensor is successfully added, the Sensor Status maybe shown as “Not connected”. Wait 1
to 2 minutes for the Sensor data to be auto-populated, or you may click on the “Refresh Sensor Data”
icon to update the Sensor readings manually.
Note:
• It is advisable to power up and pair the Sensors one at a time to minimise interferences to the pairing
process. The pairing process completes when Sensor Status is shown as “Connected”.
• During the pairing process, the Sensor must be placed near the Thermostat unit.
• Each Sensor can only be paired and connected to one Thermostat at any one time. Unpair the Sensor
from the existing Thermostat before pairing to a different Thermostat.
• Do not pair the Sensor to any other Bluetooth device.
• After the pairing process completes, mount or place the Sensor at the location where you want it to
sense occupancy or temperature readings. Maximum range is 98 ft (30 m) away from Thermostat.
