Trident AirPrime SC 1906 Wildland Unit Installation And Operation Manual Download

Page: 2 / 20

Trident Emergency Products, LLC
2940 Turnpike Drive | Suite #9 | Hatboro, PA 19040 USA

AirPrime

™ Fire Pump Priming System

™

AirPrime

™

Overview

Trident has several

AirPrime

models to meet specific needs:

Base Models

: All models are available in 2 or 3 barrel design

(depending on your water pump capacity and chassis air
compressor output CFM).

Direct Mount

: Connects to a

Hale Q Model

midship pump

priming port with two bolts. The Hale pump model name must begin
with a

such as

Qmax

. Hale supplies a filter for the Direct Mount.

Remote Mount

: This version can be used with any pump. It has

⁄

" female NPT connection and requires a simple bracket to hold

the unit to the pump house structure.

Multi-Location

riming from multiple inlet locations.

Variations and Options

1. The base

AirPrime

single location units are available with either

Automatic or Manual controls.

2. The

Multi-Location

units are available with Automatic or Manual

controls. Up to four remote locations are available. This allows for
pre-priming up to the butterfly valve for rapid water delivery and safer
fireground operations.

3. Automatic versions are available in 12 and 24 Volt models.
4. Adding a Lift Gauge which indicates how much vacuum (in feet/meters

of water) the primer is creating to prime the pump.

5. Conversion Kits for Manual to Automatic and for adding more locations

are available. Refer to

Page 16

6. AirPrime is also available for small trucks without air brakes.

See

Page 5

for additional information.

7. Industrial AirPrime units are available for large fire pumps.

Contents

Available Models ��2
AirPrime

- How Does It Work ��3

Installer Responsibilities ��4
Air Schematic, PPV, Air Hose and Connections ��5
Automatic Single Location AirPrime

™

System ��6

Automatic Single Location AirPrime™ System with Optional Vacuum Gauge ��7
Automatic Primer Switch Wiring Details ��8
Optional In Cab Primer Control ��9
Manual Single Location AirPrime

™

Systems ��10

Multi Location Installation and Operating Instructions��11
Multi Location Automatic AirPrime

™

System Diagram ��12

Multi Location Manual AirPrime

™

System Diagram ��13

Trouble Shooting Guide ��14
Trouble Shooting Guide (Continued) ��15
AirPrime

™

Industrial and SC Systems ��15

Annual Primer Testing ��16
Warranty and Product Information ��17
Installation/Operation Notes ��18
Installation/Operation Notes ��19
Repair/Replacement Parts ��20

Available Models

Automatic Control

Auto Base Model
Auto Base Model w/ Lift Gauge
Auto Multi Location
Auto Multi Location w/ Lift Gauge
Industrial Pumper Units

Manual Control

Manual Base Model
Manual Base Model with Lift Gauge
Manual Multi Location
Manual Multi Location w/ Lift Gauge
AirPrime SC 1906 Wildland Unit

100' of Suction Hose Deployed

For more information on all available models please visit:

TridentDirect.com

TridentAutoAirPrime.com

Replacing a Rotary Vane Primer?

View our

AirPrime Retrofit and Upgrade Guide

Please Visit the Trident YouTube Channel

Closed

Butterfly Valve

EMERGENCY PRODUCTS, LLC

Pre-Priming Example

Summary of Contents for AirPrime SC 1906 Wildland Unit





















Search results

Summary of Contents for AirPrime SC 1906 Wildland Unit

Reviews:

Related manuals for AirPrime SC 1906 Wildland Unit

Brands by name

Popular brands

Trident AirPrime SC 1906 Wildland Unit, Installation And Operation Manual

Search results

Summary of Contents for AirPrime SC 1906 Wildland Unit

Reviews:

Related manuals for AirPrime SC 1906 Wildland Unit

Brands by name

Popular brands