Trident NS13, Use And Maintenance Manual

11

Move the package using the handle. The overall weight of the 

appliance with its packaging is 10lb (weight of the empty machine 

plus accessories and packaging). Since the packaging elements 

(plastic bags, staples, etc.) are a potential source of danger, they 

should not be left within the reach of children, disabled persons, etc. 

For maintenance and recharging, respect the instructions provided 

by the battery manufacturer. When the battery is run down, you must 

take it to an authorised disposal centre.

The battery is classified as dangerous waste, so it is compulsory 

to take it to an authorised disposal centre.

For good battery maintenance, follow these indications:

•  Do not attempt to open the batteries for any reason whatsoever.

•  Do not let the battery get dirty or wet.

•  The battery must not be exposed to excessive heat (e.g. rays of 

sunshine, flames, etc.).

•  Do not leave the battery in places where the temperature could 

exceed 40°C.

•  Always recharge the battery at a room temperature between 10°C 

and 40°C.

•  Recharge the battery using the power supply unit supplied with 

the appliance.

•  Do not attempt to recharge damaged batteries.

•  The battery contacts must not touch metal parts, to avoid any risk 

of short-circuits.

•  The battery must be kept far from metal objects, to avoid any risk 

of short-circuits.

• 

Do not throw the battery into the fire.

•  Do not throw the battery away with domestic waste; respect the 

The procedure for removing the device from its packaging is the 

following:

1.  Open the outer box.

2.  Remove the accessories from the box and carefully lay them on 

the ground.

3.  Take the appliance out of the box.

The procedure for the safe handling of the device is the following:

1. 

To remove the power battery (1) from the appliance, you must first 

free it by shifting the stop lever (2) towards the outer part of the 

machine. Lift the battery out of the appliance 

(Fig. 1)

.

2.  Rotate the command handlebar in the direction of the arrow 

(Fig. 2)

.

3.  Close the command handlebar, pushing the handle towards the 

main part of the appliance 

(Fig. 3)

.

Warning:

  it  is  recommended  that  all  the  packaging 

components  be  kept  for  any  future  transportation  of  the 

appliance.

Warning:

 you are advised to always wear protective gloves, to avoid 

any risk of serious injury to your hands.

4.  Rotate the command handlebar in the direction of the arrow 

(Fig. 4)

.

Warning:

  when  transporting  the  appliance  on  vehicles, 

secure it according to the directives in force so that it cannot 

slide or tip over.

Warning:

  users  are  advised  to  always  wear  protective  gloves,  to 

avoid the risk of serious injury to hands.

HANDLING THE PACKED APPLIANCE

BATTERY MAINTENANCE AND DISPOSAL

HOW TO UNPACK THE APPLIANCE

HOW TO TRANSPORT THE APPLIANCE

3

2

4

The dimensions of the package are as follows:

A :    14,6 in

B :    23,6 in

C :    6,7 in

1

2

1

To power the appliance, use only the battery supplied in the package 

or by a specialised technician.

OTHER BATTERY TYPES CANNOT BE USED.

The appliance is powered by a lithium-ion battery. The battery 

compartment can house a single 10.8 V battery slot.

BATTERY TYPE