4.5 Setting the time and date
Version 3.0
14
4 Basic settings
x-touchBOX/PANEL
4.5
Setting the time and date
In order for the functions of time-controlled actions and for the frame light to work, the time and
date must be set.
1. In the
Main Menu
, press the
Time & Date
symbol.
= The dialog box
Time & Date
is displayed.
2. Set the time and date with the arrow keys and confirm with
OK
.
4.6
Adjusting the touchscreen
In the
Display
tab, the user interface can be adjusted to suit your requirements.
–
The
Display
tab is open in the
Configuration
menu.
¾
To modify the contrast, press the
- -
or
+ +
buttons.
¾
To activate a confirmation sound that is generated whenever a button is pressed, activate the
Beep on touch
check box.
¾
To switch on the screen saver, activate the
Screen saver
check box.
= When the screen saver is activated, it appears two minutes after the touchscreen has been
touched last.
¾
To center the touchscreen, press the
Calibrate
button on the touchscreen and follow the
instructions. Only carry out this function on the touchscreen and not via the web browser.
Hint
In the case of a power failure, a back-up battery supplies the clock for at least 24 hours. If no
voltage is supplied to the x-touchBOX/PANEL for a longer period of time, the date and time must
be set again.
Hint
It is possible to load an application-specific screen saver (see "Loading application-specific
buttons and screen saver", page 40).
PHASED
OUT