15
Version 3.0
4.7 Setting the frame light and display light
x-touchBOX/PANEL
4 Basic settings
4.7
Setting the frame light and display light
Setting of frame light and display light is only possible in conjunction with x-touchPANEL x-
touchBOX lacks frame light and the display light is set at the factory and cannot be modified.
The frame light is controlled in two intervals. Therefore, you can assign one colour for each interval
to the frame light or switch it off for one interval (e.g. night service). Select the colour in the dialog
box
Framelight
.
If you do not activate the screen saver, TridonicAtco recommends using the display light
Dimmed
automatically
for x-touchPANEL, since this will prevent
an image persistence
.
–
Time and date are set.
–
The
Display
tab is open in the
Configuration
menu.
1. Press the
Framelight
button in order to change the frame light or display light.
= The dialog box
Framelight & display light
is displayed.
2. To set the two starting times for the frame light, set the times with the arrow keys.
3. To set the frame light colour, press the colour field and select the desired colour or enter the
colour using the RGB values and confirm with
OK
.
- or -
To switch off the frame light, press ›Black‹ or enter the RGB values 0/0/0 and confirm with
OK
.
= The frame light is displayed in the selected colour or goes out.
4. Press the arrow key to set the display light.
= The selection window is displayed.
5. To dim down the display light 2 minutes after the device has been operated last, activate
Dimmed automatically
.
- or -
To maintain the display light, activate
Always ON
.
PHASED
OUT