4.8 Assigning names
Version 3.0
16
4 Basic settings
x-touchBOX/PANEL
4.8
Assigning names
To facilitate configurations and operating steps for later operation, you can assign application-
specific names to
Scenes, Sequences
,
Groups
and
Schedules
.
Names are assigned in the same way for scenes, sequences, groups and schedules.
–
The
Names
tab is open in the
Configuration
menu.
1. Press an arrow key below the entries
Sequences
,
Scenes
,
Groups
or
Schedules
.
= The selection window is displayed.
2. Select the lighting situation and press the
Edit
button next to it.
= The dialog box
Keyboard
is displayed.
3. Enter the new name and confirm with the Enter key.
4. Press the
Esc
button to abort the process.
Hint
If an Ethernet connection is established, you can use the keyboard of your PC for entering the
names to be assigned with x-touchPANEL (see "Ethernet interface", page 44).
Hint
If you activate the check box
Customized buttons
, application-specific graphics are assigned to
the buttons of the
Home
menu, irrespective of the assigned names. The graphics can contain
symbols or other fonts (see "Loading application-specific buttons and screen saver", page 40).
PHASED
OUT