25
Version 3.0
5.3 Sequence
x-touchBOX/PANEL
5 Basic application
5.3.1
Configuring sequences
In a sequence, scenes are saved at a defined position on a timeline. The number of repetitions is
determined with the digits
2
to
6
and
Loop
. If you enter
1
, the sequence is only called up once. If
you enter
2
, it is called up twice, and so on.
Loop
means that the sequence will be permanently
repeated.
–
One or several scenes are defined.
–
The
Main Menu
is displayed.
1. Press the
Sequence
button.
= The
SQ...
Page is displayed.
2. Press the
Folder
button to select the sequence in which the scenes are to be stored.
= The dialog box
Select sequence
is displayed.
3. Use the arrow keys to select the sequence (
SQ1
to
SQ99
) and confirm with
OK
.
= The sequence is indicated.
4. Press the
Timeline
button to enter the duration of the sequence.
= The dialog box
Timeline
is displayed.
5. Press the arrow keys of the
Duration
field until the desired period is set.
- or -
Press the numbers in the number field. Select the duration in the dialog box
Time entry
and
confirm with
OK
.
6. Press the arrow keys in the
Loop
field until the correct number of repetitions is set.
7. Confirm the entries with
OK
.
8. With the arrow keys and the magnifier, adjust the timeline section in such a way that the
starting time for the scene is visible.
9. Use the arrow keys to select the marker
Scene
(
S1
-
S16
).
10.Move the marker
Scene
to the desired position on the timeline using Drag & Drop.
11.Repeat steps 8 to 10 to enter further scenes.
12.Press the
Save
button.
= The dialog box
Save sequence
is displayed.
13.If necessary, change the sequence in which the scenes are to be saved and confirm with
OK
.
= The sequence is saved with the current settings.
14.To define additional sequences, repeat steps 2 to 13.
Hint
A sequence is not saved until you press the
Save
button and confirm the dialog box
Save
sequence
with
OK
.
PHASED
OUT