6.1 Changing the application
Version 3.0
30
6 Colour application
x-touchBOX/PANEL
6 Colour application
This chapter only explains the operating steps that are different from the
Basic
application.
It contains the following topics:
Changing the application to
Colour
Addressing and zone assignment
Colour sequences
The following topics are performed identically in both applications. They are explained at the points
indicated.
Configuring scenes (see "Configuring scenes", page 23).
Configuring schedules (see "Schedule (SDL)", page 27).
Configuring a schedule list (see "Configuring a schedule list", page 29).
6.1
Changing the application
When the application is changed, the ›x-touch‹ software is automatically restarted.
–
The
System
window is open in the
Configuration
menu.
1. Press the
Application
button.
= The dialog box
Application
is displayed.
2. Press the arrow key.
= The
BASIC
/
COLOUR
selection window is displayed.
3. Press the
COLOUR
button and confirm with
OK
.
4. Confirm the security enquiry with
OK
.
= After restarting, the
Colour
application is set.
6.2
Addressing and zone assignment
Addressing
Addressing of the operating devices is performed in the same way in the
Colour
and
Basic
applications (see "Addressing and grouping", page 19).
Zone assignment
In the ›x-touch‹ software, each RGB/RGBW operating device is assigned to a colour scale (red,
green, blue, white) of a zone using Drag & Drop. Four zones with 4 colour scales are available.
Each colour scale of a zone corresponds to a group.
Hint
If you want to change to the
Basic
application, proceed in the same way.
PHASED
OUT