31
Version 3.0
6.2 Addressing and zone assignment
x-touchBOX/PANEL
6 Colour application
Since the three groups
Red
,
Green
and
Blue
are necessary for colour mixing and only the group
White
is not required, only the groups
White
(max. 4 groups) can be controlled individually. For
basic lighting, e.g., the group
White
of the four zones is used.
The groups
White
can be dimmed, masked or switched off and saved in scenes in analogy to the
Basic
application. Depending on the configuration, the groups can be switched and dimmed
individually using the
Home
menu(see "Creating a layout for the Home menu", page 36).
6.2.1
Addressing RGBW operating devices and assigning them to zones
Refer to chapter "Addressing and grouping", page 19 for a description of the procedure and the
addressing methods
System extension
and
Reinitialization
.
–
The
Main Menu
is displayed.
1. Press the
Addressing/grouping
button.
= The dialog box
Addressing method
is displayed.
2. Activate the check box
System extension
or
Reinitialization
.
3. Press the
Continue >
button.
= The ›x-touch‹ software indicates the number of the operating devices it has detected.
4. When the message
Search completed
is displayed, press the
Complete
button.
= Every operating device is addressed.
The
Addressing of Z ...
window is displayed.
5. Press the
Folder
button to select the zone in which the operating devices are to be saved.
= The dialog box
Select zone
is displayed.
6. Set the zone with the arrow keys and confirm with
OK
.
= The zone is displayed.
7. Use the arrow keys to select the operating device address to be assigned to the zone.
8. Move the address of the operating device (1) to the group field representing the respective
colour via Drag & Drop.
= The address is displayed in the group field of the currently selected zone.
9. Repeat steps 8 and 9 until the operating devices of this zone are assigned to one of the four
group fields.
10.Press the
Save
button.
= The dialog box
Save zone
is displayed.
11.If necessary, change the zone in which the operating devices are to be stored and confirm with
OK
.
= The zone is stored.
12.Repeat steps 5 to 12 until every operating device is assigned to a zone.
Hint
Zone assignment is not stored until you press the
Save
button and confirm with
OK
in the dialog
box.
PHASED
OUT