6.3 Configuring colour sequences
Version 3.0
32
6 Colour application
x-touchBOX/PANEL
6.3
Configuring colour sequences
In a colour sequence, scenes (white light) and colour events (RGB(W)) are saved at a defined
position on a timeline. How often the colour sequence will be repeated is determined with the
digits
2
to
6
and
Loop
. If you enter
1
, the sequence is only called up once. If you enter
2
, it is
called up twice, and so on.
Loop
means that the colour sequence will be permanently repeated.
Only after a colour event has been assigned to a colour sequence can the event be configured.
A colour sequence is ended if:
Another colour sequence/scene is called up.
The colour sequence is ended manually.
The end of the colour sequence is reached.
–
The
Main Menu
is displayed.
1. Press the
Colour sequence (SQ)
button.
= The
SQ …
window is displayed.
2. Press the
Folder
button to select the colour sequence in which the scenes are to be stored.
= The dialog box
Load sequence
is displayed.
3. Select the colour sequence with the arrow keys and confirm with
OK
.
= The sequence is indicated.
4. Press the
Timeline
button to enter the
Duration
of the colour sequence.
= The dialog box
Timeline
is displayed.
5. Press the arrow keys of the
Duration
field until the desired period is set.
- or -
Press the numbers in the number field. Select the duration in the dialog box
Time entry
and
confirm with
OK
.
6. Press the arrow keys in the
Loop
field until the correct number of repetitions is set.
7. Confirm the entries with
OK
.
8. With the arrow keys and the magnifier, adjust the timeline section in such a way that the
starting time for the colour event is visible.
9. Move the marker
Colour event
to the desired position on the timeline using Drag & Drop.
= The start for the
Colour event
marker is specified.
10.Repeat steps 6 to 9 to enter further colour events.
11.Press the
Save
button.
= The dialog box
Save sequence
is displayed.
PHASED
OUT