39
Version 3.0
7.3 Configuring buttons in the Home menu
x-touchBOX/PANEL
7 Operation in the Home menu
7.3.3
Configuring the Colour scene button
Configuration of the
Colour scene
buttons is suitable for applications where you want to call up
different colour lighting situations in zones by pressing a button.
To assign a new function to a
Colour scene
button, there are several possibilities for each of the
4 zones:
Colour setting
Masking
Switching off
Fading
–
Layout for
Home
menu has been created.
–
The
Colour scene
buttons are displayed in the
Home
menu.
1. Press the button (e.g. Colour scene1) until the dialog box with the four zones is displayed.
=
2. To set the colour for the first zone, press the zone.
= The dialog box
Details for colour event
is displayed.
3. Enter the colour using one of the three tabs.
- or -
To leave this zone unchanged, activate the check box
MASK
.
- or -
Press the
OFF
button to switch off all operating devices of this zone.
4. To switch the operating devices assigned to zone White in the colour event, activate the check
box
RGBW
.
5. To set fading, press the
Timing, Fading
button, set the time and confirm with
OK
.
6. Confirm the entries with
OK
.
= The first zone of the colour scene is now set.
7. To set the other three zones, repeat steps 2 to 6.
8. Press the
Home
button.
= The
Colour scene
button is displayed in the
Home
menu with the desired lighting situation.
PHASED
OUT