43
Version 3.0
8.1 Infrared interface
x-touchBOX/PANEL
8 Interfaces
–
The
Main Menu
is displayed.
1. Press the
Configuration
button.
2. Press the green arrow key as often as necessary until the
IrDA
page (infrared devices) is
displayed.
=
3. Activate the check box
Enable discovery
to enable communication with other infrared
devices.
4. Activate the check box
Enable file reception
.
5. Position the laptop and x-touchBOX/PANEL in such a way that their infrared interfaces are
opposite to each other. They must be no more than 1 m apart and no more than 15° twisted
against each other.
6. Prepare the PC/laptop for transmitting via infrared (see operating instructions of the
manufacturer).
= If the conditions for receiving are met, the name of the laptop is indicated in the field
Infrared devices
. The infrared transmission symbol is displayed in the task bar of the laptop.
7. Click on the infrared transmission symbol in the task bar of the laptop.
= A dialog box for the selection of files is displayed.
8. Select the file ›x-touchUPDATE.biz‹ and click
Send
.
9. Confirm with
OK
on the touchscreen.
= The update of the ›x-touch‹ software is saved and the system is restarted.
PHASED
OUT