49
Version 3.0
9.1 Resetting to factory defaults
x-touchBOX/PANEL
9 Help in the case of problems
9 Help in the case of problems
9.1
Resetting to factory defaults
If you reset the configuration of the ›x-touch‹ software to the factory defaults, your settings and the
addressing of the operating devices will be deleted.
–
The
Main Menu
is displayed.
1. Press the
Main Menu
button.
2. Press the
Configuration
button.
3. Press the
System
tab.
4. Press the
Reset to factory defaults
button.
= The ›x-touch‹ software is reset to the factory defaults.
9.2
The touchscreen does not react properly
If the touchscreen does no longer react properly, it must be recalibrated.
1. Press the
Main Menu
button.
2. Press the
Configuration
button.
3. Press the
Calibrate
button.
4. Touch the calibration symbol with a pen and ensure that you are touching the center of the
calibration symbol.
5. Repeat step 4 twice.
= The touchscreen is now centered.
9.3
Scenes cannot be defined
1. Press the
Main Menu
button. Ensure that each device is assigned to exactly one group.
2. Press the
Addressing/grouping
button.
3. Press the
Folder
button and check the groups one after the other. Ensure that the device is
assigned to a group.
4. Change the grouping if necessary.
The device might become damaged if the touchscreen is calibrated with the remote control
(Ethernet connection).
¾
Only calibrate the touchscreen on the x-touchBOX or x-touchPANEL and not via the web
browser.
NOTICE
Hint
To configure a scene, one operating device must only be assigned to one groupe, because
otherwise conflicts might occur.
PHASED
OUT