background image

www.tridonic.com

1

Subject to change without notice. Information provided without guarantee.

Data sheet 11/20-EM110-1

Emergency lighting units

EM converterLED

Product description

•  Self-contained emergency lighting LED Driver with    

DALI interface and automatic test function

•  For LED modules with a forward voltage of 10 – 54 V
•  For luminaire installation
•  Nominal life-time up to 100,000 h
•  5-year guarantee

Functions

•  Non maintained operation
•  SELV for output voltage < 60 V DC
•  Integrated DALI bus power supply
•  1, 2 or 3 h rated duration selectable with duration link
•  Compatible with most constant current LED Drivers (refer to 

chapter „LED Driver compatibility“)

•  3-pole technology: 2-pole LED module changeover 

and delayed power switching for the LED Driver

•  Constant power output
•  Two-colour status display LED
•  Black Box data recording

Interfaces

•  DALI interface for controlled testing and monitoring
•  Near field communication (NFC)

Battery management

 NiMH/LiFePO4:
•  Intelligent charge system
•  Deep discharge protection
•  Polarity reversal protection for battery via polarized connector 

plug

•  Automatic detection of the connected battery technology  

(NiMH or LiFePO

4

 batteries)

 LiFePO4:
•  Tridonic LiFeGuard ensures safety in use (refer to chapter  

„Safety LiFePO

4

“)

•  Temperature protection

Batteries

•  NiMH or LiFePO

4

 batteries

•  NiMH: 4-year design life / 1-year guarantee

•  LiFePO

4

: 4 – 8 years design life / 3-year guarantee

•  For battery compatibility refer to chapter „Battery selection“

È

Standards

, page 5

Wiring diagrams and installation examples

, page 6

EM converterLED PRO NF MH/LiFePO4 50 V

Powered DALI PRO NFC series

 

Summary of Contents for EM converterLED ST MH/LiFePO4 50 V
















Reviews: