Manual x/e-touchPANEL 02 | 01-2021 | 2.9 | en
Operation in the Home menu
c
83 / 118
2.
3.
4.
5.
6.
7.
8.
9.
Click on Zone to set the colour for the first zone.
-> The dialog box Details for colour event is displayed.
Enter the colour using one of the three tabs.
- or -
Activate the check box MASK to leave this zone unchanged.
- or -
Click on the OFF button to switch off all operating devices in this zone.
To switch the operating devices in the colour event that are assigned to the White zone, activate the check box
RGBW.
To set fading, click on the Timing, Fading button, set the time and confirm with OK.
Confirm the entries with OK.
-> The first zone of the colour scene is set.
Repeat steps 2 to 6 to set the other three zones.
Click on the Home button.
-> The Colour scene button is displayed in the Home menu with the desired lighting situation.
6.6.4. Manually switching a sequence, schedule or schedule list
You can operate a sequence, schedule or schedule list manually on this page.
The following operating elements are available:
