background image

Application of detergent, 
softener and bleach

    

    

The way for placing the washing powder is to directly put it into barrel of the washer. 

    It is necessary to use proper amount of washing powder. Using a big a mount of detergent 
    will generate suds over clothes. therefore rinse process will not eliminate it.  

 

    
    

Slowly  pour  the  clothes  

softener

  in  the  inlet softener opening,  but washing powder, bleacher and 

sizing agent should not be filled through this opening.  ( If the location  of the filling opening does not  fit  
the operation,  clockwise rotate the spin barrel to change the location of filling opening for 

softener

 ) The  

softener

  can only be used in the whole procedure of washing  program, however, the bulking results will 

be much better when using normal and strong wash program.
   The 

softener

 will be filled into the washing tub automatically before the final rinsing operation. After the  

clothing   

softener

 is filled,  the lid of the washer  should  not  be  opened during the spin procedure,  

otherwise an error  will  be caused for the  automatic  filling  time of  

softener

  so  that  it  can  not  execute 

effective functions.
  Do not place the clothes 

softener

 in filling opening for long time, otherwise it will get solidified resulting in 

slack filling.

Application of softener

     

Before  washing,  dilute   the   bleacher   with   sufficient   water   and   then  fill  it through the inlet 

bleach opening.
     The bleacher should not be directly poured into the washing barrel, otherwise it will cause fading of 
colorful clothes. Please correctly use the bleach according to the application method of bleach supplier. 

Standard using amount of water, washing powder 
and clothes softener

about 16 ml

about 18 ml

about 20 ml

about 22 ml

about 24 ml

Application of detergent

Filling opening for bleacher   

   Filling opening for softener

Application of bleacher

Note: The using amount of washing powder will vary with its different quality.

Rated amount of water (liter)

        Using 

     amount of

     washing 

     powder

Fast Program

  Normal program

Using amount of 
Clothes softener

    Extra low

   Medium

    High

   Low

    Extra high

Summary of Contents for TR-KQB60-560



















Reviews: