background image

SAFETY AND PRECAUTION

Observe the following items in order to prevent from injuring yourself,

to others and the damage of  property:

Please observe following contents of graphics.

Warning

Warning

Caution

 This indicates serious injury or death to human being
 may be caused.

This will remind you that injury to people and damage
 to property may occur.

Do not  rinse the machine with water
 when cleaning. A damped clothes or
sponge is recommended for 
cleaning purposes.

Do not install the machine in 
damp and raining environment to avoid 
electric shocking, catching fire, faults 
and distortion 
accidents.

No dismantling

No touching

No dampness

No rinsing

This graphics represents

operation prohibited], and detailed prohibitive 

items will be displayed inside the graphics.

This graphics represents

cause attention

and detailed cautions

 will be displayed inside the graphics.

This graphic represents [forced execution], and detailed force 
execution items will be displayed inside the graphics.

Do not disassembly 
and assembly the 
machine without 
authorization.

Do not insert your hand 
and take out clothes during 
spin process until 
it is fully stopped.

The appliance should be connected to the water mains using new hose-sets and old hose-sets 

should not be reused.

When the appliance is placed on a carpet, the ventilation openings  in the base must not be 

obstructed.

This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the appliance by a person responsible for 

their safety.

Young children should be supervised to ensure they do not play with the appliance.

Summary of Contents for TR-KQB60-560



















Reviews: