17
Specifications and technical parameters of washer
18
240V / 50Hz
Rated power supply
460W
Input power of motor
7.0kg
Rated washing capacity
7.0kg
Rated spin capacity
X
X
560 585 960
Overall dimensions
Application water pressure
38kg
Weight of whole machine
0.03MPa
~
1MPa
Washing mode
New water flow
Draining mode
Spin mode
Centrifugal spin
Upper drain
Following phenomena are not faults of washer
There is water leaks from the
water drain hose when used
for first time
Make up water during
washing process
During the spin process, spin
suddenly stops before water
filling and rinsing.
The clothes not sufficiently
spinned after spin process
Symptom
This is residual water after the performance test
in the factory.
During the washing process, the water will be
automatically made up when the water level is lower.
This is because the clothes is at one side. So the safety
switch starts to work to make up water, rabble while
running. The spin process will be continued when the
clothes is in balance status. in case of failure of three
corrections of the machine. please manually adjust the
balance of clothes.
The spin efficiency of full automatic washer is a
little lower than that of twin tub washer. The heavy
and thick part of clothes will cause uneven spin.
Causes
