Trijicon HD SPOTTING SCOPE, Instruction Manual

16

17

Detaching Eyepiece 

Trijicon HD

™

 Spotting Scope features a removable  

eyepiece with a 

Release Lever

 which allows the use  

of variable magnification eyepiece options.

1.  Locate the eyepiece 

Release Lever

 located at  

the rear of the scope.

2.   Pull down and hold the eyepiece 

Release Lever

while rotating the eyepiece counter-clockwise  
until it stops.

3.  Carefully lift eyepiece straight out to remove.
4.   Clean dust out of eyepiece socket and mating 

eyepiece with a dust free cloth.

PREPARATION FOR USE

PREPARATION FOR USE

Attaching Eyepiece

To attach an eyepiece onto the Trijicon HD

™

 Spotting Scope:

1.  Line up the white 

Alignment Dot

 on the body 

of the scope with the white 

Alignment Dot

 on 

the side of the eyepiece.

2.   Once dots are aligned, and eyepiece is flush 

with the body, rotate clockwise until the 

Release 

Lever

 clicks. Pull the eyepiece up gently to verify 

the eyepiece is locked.

Note:

 The Trijicon HD

™

 Spotting Scope can only accept 

Trijicon eyepieces.

FIGURE 10

Alignment
Dots

FIGURE 9

Release 
Lever

Eyepiece