9
5.
Click
Read [F7]
.
Enter the access code (default
–
1234) when prompted and
click
OK
.
Click
Remember
if you want the software to remember your
access code. The prompt window will not appear next time.
Tick
Save access code
for software to remember the password and not require for it next time.
Click
Restore [F11]
to restore the communicator to factory settings. When prompted, click
Yes
.
Select
Main
in the menu and set desired parameters:
Object ID
Field to enter the four
-
digit identification number;
Hex
Tick if hexadecimal numbers will be used for entering the object ID;
SIM card PIN code
Field for SIM card PIN code. Leave the field empty if PIN code request is disabled;
User code
Field to enter the user code. Only those operation parameters that are allowed to be edited by
the administrator can be edited when logging in with the user code;
Admin code
Field to enter the admin code. All operation parameters can be edited when logging in with the
admin code. Also, possibilities for editing the operation parameters for those logging in with the
user code may be limited;
Communicator type
Serial number of the communicator
Communicator firmware version
