16
January, 2021
Cellular communicator G16T_LTE-M
2.
Protegus
cloud
is enabled. See
chapter 6.4 “User reporting” window
;
3.
Power supply is connected (“POWER” LED illuminates green);
4.
Registered to the network (“NETWORK” LED illuminates green and f
lashes yellow).
3.
Click
Add new system
and enter the
G16T
’s
“
IMEI/Unique ID
” number.
This number can be found on the device and the
packaging sticker. After entering press
Next
.
Important:
The control panel zone to which the
G16T
output OUT is connected to has to be set to keyswitch mode.
Follow the instructions below if the security control panel will be controlled with the
G16T
output OUT, turning on/off the control
panel keyswitch zone.
1.
In the new window, click
Areas
in the side menu. In the next window specify how many alarm system areas are in the
system and press
Next
.
2.
In the new window, identify what is the number for each of the specified areas in the security system and press
Save
.