21
January, 2021
Cellular communicator G16T_LTE-M
•
Line No
- enter line number of the receiver.
•
Receiver No
- enter the receiver number.
“
PROTEGUS
cloud” tab
Protegus
service allows users to remotely monitor and control the communicator. For more information about
Protegus
service,
“Protegus Cloud” settings group
•
Enable connection
- enable
Protegus
service,
G16T
will be able to exchange data with
Protegus
app and to be remotely
configured via
TrikdisConfig
.
•
Cloud access Code -
6-digit code for connecting to the
Protegus
app (default - 123456).
Important:
1.
Ensure that the SIM card is activated and working before using it.
2. If mobile internet connection will be used for sending events via IP channel to the monitoring station
receiver or to
Protegus
, ensure that mobile data service is enabled.
“SIM card” settings group
•
SIM card PIN
- enter the SIM card PIN code. This code can be disabled by inserting the SIM card into a mobile phone and
disabling the request. If you disabled the SIM card PIN request, leave the default value in this field.
•
APN
- enter APN (Access Point Name). It is required for connecting the communicator to the internet. APN can be found
on the website of SIM card operator (“internet” is universal and works in the networks of many operators).
•
Login, Password
- if required, enter the user name (login) and password for connection to the internet.
•
DNS1, DNS2
- (Domain Name System) server that specifies the IP address of the domain. Used when domain is set in the
communication channel
Domain or IP
field (not IP address).
