26
January, 2021
Cellular communicator G16T_LTE-M
2.
Protegus
cloud
is enabled. How to enable cloud is described in chapter 6.4
““User reporting” window”
;
3.
P
ower supply is connected (“POWER” LED illuminates green);
4.
R
egistered to the network (“NETWORK” LED illuminates gre
en and flashes yellow).
2.
In the
Remote access
field,
enter the communicator’s
IMEI/Unique ID
number. This number can be found on the device
and the packaging sticker.
3.
(Optional) In the
System name
field, enter the desired name for the
G16T
with this Unique ID.
4.
Press
Configure
.
5.
In the newly opened window click
Read [F4]
. If required, enter the administrator
or installer code
.
6.
Set the necessary settings and when finished, click
Write [F5].
Test communicator performance
When configuration and installation is complete, perform a system check:
1.
Generate an event:
-
by arming/disarming the system with the control panel keypad;
-
triggering a zone alarm when the security system is armed.
2.
Make sure that the event arrives to the Central Monitoring Station and/or is received in the
Protegus
application.
3.
To test communicator inputs, trigger them and make sure you receive the correct event.
4.
To test the communicator outputs, activate them remotely and check their operation.
5.
If the security control panel will be controlled remotely, arm/disarm the security system remotely by using the
Protegus
app.
Manual firmware update
Note:
When the communicator is connected to
TrikdisConfig
, the program will automatically offer to update the
device’s
firmware if updates are present. Updates require an internet connection. Antivirus software, firewall
or strict access to internet settings can block the automatic firmware updates.
G16T
firmware can also be updated or changed manually. After an update, all previously set settings will remain unchanged.
When writing firmware manually, it can be changed to a newer or older version. To update:
1.
Run
TrikdisConfig
.
2.
Connect the
G16T
via USB Mini-B cable to the computer or connect to the
G16T
communicator remotely.
•
If a newer firmware version exists, the software will offer to download the newer firmware version file.
3.
Select the menu branch
Firmware
.
4.
Press
Open firmware
and select the required firmware file. If you do not have the file, the newest firmware file can be
downloaded by registered users from www.trikdis.com , under the download section of the
G16T
communicator.
5.
Press
Update [F12].
