3
January, 2021
Cellular communicator G16T_LTE-M
Safety requirements
The communicator must be installed and maintained by qualified personnel.
Before installation, please read this manual carefully to avoid mistakes that may cause malfunction or even damage to the
equipment.
Changes, modifications or repairs not authorized by the manufacturer will void your rights under the warranty.
This unit should be serviced by a qualified technician once a year.
Do not use the device with medical devices or where it may interfere with other devices and cause any potential danger.
Do not expose the device to high humidity, chemical environment or mechanical impact.
Clean the device with a dry cloth. Do not clean it with chemicals, detergents.
Do not use the device in a hazardous environment. Do not store or install the device in overheated, dusty, wet, or overcooled
locations.
Keep the device dry. Any liquid, ie rain, moisture, can destroy or damage the internal circuits.
The device is mounted in areas with limited access. Any system repair should only be done by qualified, safety-conscious
personnel. Do not disassemble or reinstall the device. Do not try to repair it yourself.
The mains power must be disconnected before any installation or adjustment work state. Installation or maintenance of the
device should not be performed during stormy conditions.
Blown fuses or any other component of the device must not be replaced by the user.
Handle with care. Do not vibrate or shake it violently.
Act in accordance with local regulations and do not dispose of your old alarm system or its components with other
household waste.
Agency Listings and Approvals
These listings and approvals apply only to the module specified in this document, In some cases, listing may be in process.
•
FCC Statement.
This equipment complies with FCC rules Part 15, FCC registration No. XMR201707BG96 and operation is subject to the
following conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received.
•
UL standards
–
Pending.
Limited Liability
The user agrees that despite the Device could reduce the risk of fire, theft, burglary or other dangers, it does not guarantee
against such events. Trikdis LTD will not take any responsibility regarding personal, property or revenue loss while using Device
responsibility according to local laws does not exceed the value of the purchased system. TRIKDIS LTD is not affiliated with
GSM operators providing cellular services, therefore is not responsible for network services, coverage or its operation.
Manufacturer Warranty
The communicator is given a 24-month warranty effective from the date of sale-purchase. For the duration of the warranty
period, free repairs are guaranteed for faults caused by the manufacturer.
The warranty is valid if the communicator was installed by qualified personnel following the instructions in this document
and the applicable regulations for installing electrical equipment and operated following the instructions in this document
and the applicable regulations for safe operation of electrical equipment.
The communicator
must be submitted for repairs in the manufacturer‘s packaging along with a defect report stating the
nature of the malfunction.
Once the warranty has expired, the communicator
‘s technical maintenance and repairs are performed at the buyer‘s expense.
The warranty can be terminated prematurely if:
•
Unauthorized personnel repaired or tried to repair the communicator;
