5
January, 2021
Cellular communicator G16T_LTE-M
Description
Cellular communicator
G16T
can be connected to any alarm panel that has a landline dialer and supports dialing in Contact ID
or SIA or 4+2 protocol with DTMF tones.
The communicator can transmit full event information to the
security company’s monitoring station receiver
.
The communicator works with the
Protegus
app (only when Contact ID is used). Users can control their alarm system remotely
and receive notifications about events.
Protegus
app works with all security alarm panels to which the communicator is
connected to, regardless of manufacturer. Communicator can transmit event notifications to the Central Monitoring Station and
work with
Protegus
simultaneously.
Features
Connects to p
anel’s landline dialer:
•
Communicator
can be connected to control panel’s landline dialer with 2
wires.
Sends events to monitoring station receiver:
•
Sends events to TRIKDIS software or hardware receivers that work with any
monitoring software.
•
Can send event messages to SIA DC-09 receivers.
•
Connection supervision by polling to IP receiver every 30 seconds (or by user
defined period).
•
Backup channel, that will be used if connection with the primary channel is
lost.
•
With parallel communication channels events can be sent to two receivers at
same time.
•
When
Protegus
service is enabled, events are first delivered to CMS, and only
then are sent to app users.
Works with Protegus app:
•
“
Push
” and special sound notifications informing about
events.
•
Remote system Arm/Disarm.
•
Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
•
Different user rights for administrator, installer and user.
Notifies users:
•
Users can be notified about events with
Protegus
app.
Controllable outputs and inputs:
•
3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.
•
Output are controlled with the
Protegus
app.
•
Add additional inputs and controllable outputs with wired
iO-8
expanders.
Quick setup:
•
Settings can be saved to file and quickly written to other communicators.
•
Two access levels for configuring the device for CMS administrator and for installer.
•
Remote configuration and firmware updates.
This manual applies to these communicator model:
•
G16T
–
version 6, 1 SIM, LTE CatM1.
