8
January, 2021
Cellular communicator G16T_LTE-M
Note:
Before you begin, make sure that you have the necessary:
1.
USB cable (Mini-B type) for configuration.
2.
At least 4-wire cable for connecting communicator to control panel.
3.
Flat-head 2.5mm screwdriver.
4.
Sufficient gain cellular antenna if network coverage in the area is poor.
5.
Activated Nano-SIM card (PIN code request can be turned off).
6.
Particular security control panel`s installation manual.
Order the necessary components separately from your local distributor.
Quick configuration with
TrikdisConfig
software
1.
Download configuration software
TrikdisConfig
from www.trikdis.com (type
“
TrikdisConfig
”
in the search field) and install
it.
2.
Open the casing of the
G16T
with a flat-head screwdriver as shown below:
3.
Using a USB Mini-B cable connect the
G16T
to the computer.
4.
Run
TrikdisConfig
. The software will automatically recognize the connected communicator and will open a window for
configuration.
5.
Click
Read [F4]
to read the communicator’s
settings. If requested, enter the Administrator or Installer 6-digit code in the
pop-up window.
Below we describe what settings need to be set for the communicator to begin sending events to the Central Monitoring Station
and to allow the security control to be controlled with the
Protegus
app.