![background image](http://html1.mh-extra.com/html/trikdis/gv15/gv15_user-manual_1162624012.webp)
©1997-2015 TRIKDIS
12
www.trikdis.com
Controller GV15 Controller operation and configuration with “TrikdisConfig”
Access parameters
6.3.1
Changing Access and SMS password
Logon and SMS password is designated for authorized user recognition. By entering the password, the user will be
able to change the controller operation parameters via "TrikdisConfig" or SMS messages. The factory default Access
and SMS password is 123456.
To change the password, go to the program menu System settings, field Access options, and click the button Change
next the Access and SMS password. Enter the new password for two times in the pop-out window.
For the program to remember the password and not to prompt entering it when writing and reading the parameters,
mark the checkbox next to Remember Password.
6.3.2
Restore of default settings
To reset the controller default settings, go to the program menu System settings, field Access options, and click the
button Restore next to Default Settings.
Default settings may be reset even without being logged in to the controller with password. However, in order to do
so, the checkbox shall be marked next to Allow to others to press “Restore” button. In such a case, having the
equipment connected via the USB cable to the computer, it is not necessary to read its parameters, the button
Restore will be active.
Note: Access and SMS password is reset along with the factory settings. It is recommended to change the
password.
Note: password shall consist of six symbols, digits and Latin letters only.