Trikke Colt Owner’s Manual - V0 11/18/14 -
page 11
5.3
- Connect the motor cable to the
controller.
5.4
- Tuck in the connectors inside the
controller box, so they are not exposed.
STEP 6
Adjusting Brakes
The brakes are pre-adjusted at
the factory. If additional
adjustment is needed, please
refer to
BRAKE ADJUSTMENT
on
page 21.
STEP 7
Pre-ride Check
· Make sure you correctly followed steps 1-6 for the proper assembly of your vehicle.
· Check all bolts that secure the fork and handlebars. Push forward and pullback on the
handlebars strongly to verify they're secured.
· Make a final check of the brake by spinning the rear wheels. They should rotate freely
until you apply the brakes. It must be possible to vigorously squeeze the brake levers
without the brake levers touching the handlebars.
·
Check the folding mechanism to ensure that the arms are locked in the riding
position.
·
Check the air pressure in all tires to meet the recommended levels (See page 20).
WARNING!
Before riding the first time, please take a few minutes and review the Safety Riding
Tips on pages 3-6 of this manual.
For the safety of friends and others who will try your new Colt it is your responsibility
to guide them how to ride safely. Make sure you have read and understood all
warnings and safety information contained in this owner's manual before riding.
Please wear a safety helmet for riding.
5.4