User's Manual Rev B / February 2021 / M125 Helium Compressor
97-00020-000
3
3.2.2
High Pressure Related Warnings
High gas pressure is present within the system and may cause severe injury if a safe pressure level is
exceeded.
Do not charge the compressor without using a pressure regulator. Do not charge the compressor to a
pressure level that exceeds limit set by the manufacturer.
The static pressure of a compressor is predetermined by the manufacturer based on operational safety
and performance considerations. Do not exceed this level when charging a compressor.
3.2.3
Helium Gas-Related Warnings
Helium gas can cause rapid asphyxiation and death if released in a confined and un-ventilated area.
Use a pressure reducing regulator when withdrawing helium gas from a high-pressure gas cylinder.
Detaching the helium flex lines when the compressor load is at low temperature may cause the
pressure to rise in the system beyond the permissible level therefore creating a safety hazard.
3.2.4
Heat-Related Warnings
The compressor motor may become hot during operation. Wait for the motor to cool down before
working inside the compressor.
3.3
Operator Instructions
Follow standard Model 125 Helium Compressor operating procedures as described in this manual. If you still have
questions regarding the safe operation of the Model 125 Helium Compressor, please contact Trillium US Inc. Technical
Support using the contact information found in Section
Error! Reference source not found.
.
If the equipment is used in any manner not specified by the manufacturer, the protection provided by
the equipment may be impaired.
Maintenance personnel must verify safe state of equipment after all repairs.
