ASSEMBLY INSTRUCTIONS
Carefully remove all the parts from the box and place on a flat surface. Check the Parts List to
make sure all the parts are included.
(1) Place and the matching four Base section pole ( Part #5 ) on the floor, insert one end of
each Bar into the corresponding holes in the Sections to shape a whole base; (See FIG.1)
(2) Insert the Lower section pole ( Part #4) into the base section by matching the rod and hole
respectively; then insert the Upper section pole (Part #3) into the matching Lower section pole
by pressing the button attached to the end of the lower pole and insert the top end of upper
section pole into the matching hole of the Rib (Part #2) to shape the contour of the cone tree;
(See FIG.2)
(3) Insert a tab on the Top Star (Part #1) thru the matching hole of Rib (Part #2) tightly, Scatter
carefully the lighting set, align each lighting string with the stacked pole of cone then fasten the
lighting string to hole on the base section pole with the wire ties attached to the end ot the
lights . (See FIG.3).
(4) Secure the cone tree/base to the ground with the Ground Stakes (Part #6); (See FIG.3)
7Ft Twinkle Cone Tree
ITEM NUMBER:TY-S7-140L-G40-TW5
A.
Lighting Set Wiith Top Star
Qty
：
1pc
B. Rib
Qty
：
1pc
C.
Upper section pole
Qty
：
4 pcs
D.
Lower section pole
Qty
：
4 pcs
E. Base section pole
Qty
：
4pcs
F.
Ground Stake
Qty
：
4pcs
FIG.1
FIG.3
FIG.2
