TriMark 24324-03, Installation Instructions Manual

Introduction 

This manual provides the necessary information for the proper 
installation and use of Tri

Mark

’s CAN 

e-ASK 

system. The 

e-ASK 

system comes with the following components: 
 



e-FOB 

 keyless entry radio frequency [RF] FOB transmitter and 

receiver    



e-PAD  

keypad user interface 

e-PAD Operation and Features 

The 

e-PAD 

is shipped with default authority and access codes. Unless 

the OEM or dealer has changed default codes, the authority and access 
codes are as follows: 

1 

Digit 1 

Digit 2 

Digit 3 

Digit 4 

Digit 5 

1 / 2 

3 / 4 

5 / 6 

7 / 8 

9 / 0 

Digit 1 

Digit 2 

Digit 3 

Digit 4 

Digit 5 

7 / 8 

7 / 8 

7 / 8 

7 / 8 

7 / 8 

Access code

: 

Authority code:  

Locking Doors With Keypad 

Press and hold down the 1 / 2 button for 1-2 seconds. An access code 
is not needed to lock the doors. 
 

Unlocking Doors With Keypad 

Entering a valid 5-digit access code enables a secure operation. After 
entering an access code, the keypad is enabled for 5 seconds and an 
additional button press initiates a secure operation, such as unlocking 
the doors. 

1.  Enter access code. 
2.  Press and release: 



1 / 2 button to unlock driver door, or 



3 / 4 button to unlock driver and passenger doors 

Note: 



The authority code does not allow for secure operations. It is 
only used to assign access codes (see page 3  for information on 
setting codes). 



The secure keypad operations are set depending on the system 
configuration.