TriMark 24324-03, Installation Instructions Manual

2 

e-FOB Operation and Features 

Note:  



The RF features are an option that may not be available on your 
vehicle. 



The CAN module and transmitters are shipped programmed. 
After making all necessary wiring connections, (see page 6 for 
wiring information), the 

e-FOB 

system will function as shown. 

Additional Features

Dome/Porch Light Activation 

The dome light is activated for a timed duration (20 seconds) whenever 
the system is unlocked from keypad or FOB transmitter. This is an 
optional feature that the OEM may not have installed. 
 

e

-

PAD Anti-tamper Deactivating Feature 

After repeated attempts to enter  code (20 button presses without 
enabling), the keypad enters an inactive mode that disables button for 1 
minute. This helps prevent access by entering random codes. The 
keypad does not beep while the system is disabled. 
 

Teaching Keypad New Authority / Access Codes 

When a new authority code is assigned, all existing authority and access 
codes are erased. 
 

Note: 

The authority code assigned following these instructions is also an 

access code saved to the (1 / 2) button. 
 

1.  Touch the yellow wire of keypad to ground. There will be a three-

second beep. When the beep starts, remove the GND. 

2.  Enter a five-digit code. 
3.  Enter the new code again. 

 Button 

Function 

 Lock 

 Locks all doors 

 Unlock 

 Unlocks all doors