TriMark 24324-03, Installation Instructions Manual

Notes: 



The authority code is to be controlled by individuals (owners of 
vehicle, fleet manager, etc.) who manage the distribution of 
access codes to vehicle users. 



The authority code should be changed when the vehicle is sold. 



The authority code does not enable secure functions (lock/
unlock doors, etc.). It is only used to assign access codes. 

 
The following area can be used to document the authority code: 
 
Authority code: 

Assign New Access Codes 

With a valid authority code (see page 2), an access code can be 
programmed with the following instructions. 
 

1.  Press the (5 / 6) button for 5 seconds, the keypad will beep. 

(Backlight LEDs of the keypad flash indicating the learn mode.) 

2.  Enter the 5-digit authority code (see page above). Keypad will 

provide a long beep that will stop after you have defined an 
access number. 

3.  Press and release any button. This button corresponds to the 

access number being programmed. For example, press (1 / 2) 
button for access code #1 and press (3 / 4) button for access 
code #2. 

4.  Enter in your new 5-digit access code. The keypad will provide 

3 beeps. 

5.  Re-enter new access code. The keypad will provide 3 beeps. 

 
Repeat process to assign additional access codes. 
 



Up to 5 different access codes can be assigned at one time. 
As additional access codes are defined, pre-existing access 
codes are overwritten. For example, if a new access code is 
assigned for access #3, the previous access #3 code is no 
longer valid. 



A one second beep means that an error was made and no 
code was programmed. 

3 

Digit 1

Digit 2

Digit 3

Digit 4

Digit 5