TriMark e-FOB, Installation Instructions Manual

2nd Unlock Output 

Press and release the Unlock button on the FOB transmitter twice for a 
pulse output. Enter secure operation #2 from keypad in standard mode. 
In cargo mode, the 2nd unlock output occurs with a cargo unlock 
button press. 

 
3rd Unlock Output 

The 3rd unlock output is actuated with the unlock command and with 
the secure operation #3. If DIP switch #10 is on, the 3rd unlock is 
staggered to the lock output. The secure operation #3 continues to 
provide a pulse. In cargo mode, staggered lock occurs with a cargo 
lock button press. 

 
2nd Auxiliary Output 

The 2nd Auxiliary output is actuated by pressing the doorbell button on 
the keypad or holding down the unlock button for 2 seconds. The 
output is either a pulse output or a 5-minute toggle dependent on DIP 
switch #9. This is the doorbell feature on the doorbell keypad. 

 
Panic Mode 

Pressing and holding the Horn button (center left) for 2 seconds 
activates panic mode. During panic mode, horn/siren is continuously 
activated and headlights and parking lights flash for 30 seconds. 
Pressing the Lock or Unlock button deactivates panic mode.  
 

Lock/Unlock Confirmation 

The horn and siren chirp once when the alarm is armed. If the alarm 
has been set off since the last unlock command, the siren and horn 
chirp 4 times to indicate the alarm activity when the system is 
disarmed. The horn and siren chirp twice on unlock. The headlight and 
parking light outputs pulse once on a lock and unlock. 
 

Starter Kill Feature 

The starter kill feature is active for 30 minutes after the alarm is 
activated. Install a relay controlled by the starter kill feature between 
the ignition key switch and starter solenoid. 
 

Vehicle Alarm 

The alarm is armed when the doors are locked per DIP switch #6. 
When the alarm is armed, the parking lights flash and the horn/siren 
chirp. The smart LED flashes continuously. 
 
 

12