19
ANLEITUNG 04_21
•
To avoid possible thermal shock, clean the modules in the early morning hours when the module is still
cold. This is especially recommended in regions with hotter temperatures.
•
In cold environments with snow, do not attempt to remove the frozen snow or ice from the module as
this may scratch the front glass. Only soft snow can be removed carefully with a soft brush.
•
Do not use abrasive sponges or aggressive tools that could scratch the surface of the module; in no
case should the dirt be removed dry, as this would result in micro-scratches that could negatively
affect the module's performance.
•
Do not use high-pressure cleaners.
•
Do not use cleaners that are highly acidic or strongly alkaline. Cleaners containing hydrofluoric acid
(HF) and pure alcohol or pure acetone must not be used.
Module at end of life
Please hand in electrical equipment that is no longer required for disposal at the designated
collection points. For information on where to dispose of the equipment, please contact your local
authorities. The garbage can symbol on the TRIMAX product labels means that the equipment must
be disposed of as hazardous waste in accordance with local regulations.
WEEE Reg-No.: DE65803239
DISCLAIMER
The use of this manual and the conditions or methods of installation, operation, use and maintenance of the
product are beyond the control of TRIMAX Solar. TRIMAX Solar expressly disclaims liability for any loss,
damage or expense arising out of or in any way connected with the installation, operation, use or
maintenance. TRIMAX Solar GmbH assumes no responsibility for infringement of patents or other third party
rights that may result from the use of the PV product. No license is granted, by implication or otherwise,
under any patent or patent rights.
