background image

4

• 

Please read these instructions carefully. Note the safe operational requirements, warnings and

cautions. Use the product correctly and with care for the purpose for which it was intended. 
Failure to do so may cause damage or personal injury, and will invalidate the warranty.

• 

Please keep instructions safe for future use. 

• 

Keep this product out of the reach of children.

• 

Ensure that no more than one person is working at the same system at the same time.

• 

Keep hands away from the blade to avoid injury.

• 

Keep loose items eg. jewellery, clothing, neckties etc away from the blade to avoid personal

injury or damage to the product.

• 

Ensure lever is moved with both hands. 

• 

After use ensure the knife lever is moved back to the starting position until the knife is locked.

• 

Do not disassemble the front safety guard.

• 

Do not grasp underneath the knife edge.

• 

Follow all instructions when replacing the knife blade. 

• 

This product is intended for indoor use only. Do not use outdoors.

• 

Do not expose product to water or other liquids.

• 

Keep guards and covers in place at all times. 

• 

Ensure you are stood in front of the system when in use. 

• 

Do not force the system.

• 

Maintain system with care. 

• 

For electric models, ensure the power supply is disconnected when not in use.

• 

This cutting system is designed for cutting paper, do not cut wood, plastic etc with the cutter. 

Specifications

Safety Instructions

Model

                                                       

Length

Max Paper Size

Cutting Capacity

Table Size

RE3943**

370mm

A4

15mm/150 sheets

265x475x450mm

RE3947

430mm

A3

20mm/200 sheets

1060x640x700mm

RE3946

430mm

A3

60mm/600 sheets

1080x680x740mm

RE3971

475mm

A3

80mm/800 sheets

1310x766x769mm

RE3952E

o

430mm

A3

45mm/450 sheets

1210x630x820mm

   ** Stand not included, available to order.  

 o

 Electric model

Summary of Contents for RE3943
















Reviews: