8
•
Pushing the back gauge crank slightly towards the system and turn anti-clockwise in order to insert the
paper pile. Turn the back gauge crank clockwise to adjust the measure to what you need.
•
Turn the clamp hand wheel clockwise to clamp the paper pile and close the safety guard.
•
Pushing two enable switches simultaneously and hold it until the cutting is complete.
•
The light will check the position of the paper pile to be cut.
•
The blade will automatically stop when the safety guard is open. The system can be operated only
when the safety guard is closed securely.
Operation
Electric Models Only:
Electric Power Paper Trimming Specification
Installation of power system
Please follow the below specification when installing the system:
•
The knife does not move: please make sure the main motor magnetic contact is activated.
•
No power: Please check the power source and the fuse
•
Overloaded: Please wait until the breaker reset automatically when the indicator light is off, and then
reduce the pile of paper.
•
The system cannot work after closing the safety guard: Press the 2 enable switches again and check
the safety guard is completely closed.
Trouble Shooting
Please note: Do not dispose of electrical appliances as unsorted waste, dispose of this system correctly.
