Trina Solar User Manual | Vertex Series Modules
5
Please drive slowly and do not allow forks to hit the cartons or pallets. It is recommended to operate
the forklift from the short side of the pallet and not touch the glass side. If the operation must be
carried out on the glass side, please place buffer protection material (in yellow) in advance to
prevent the inside modules being damaged due to the external force.
It is recommended to extend the height or width of the forklift backrest to prevent directing touch
with the module glass.
Since the packing box will block the sight of the forklift driver, it is recommended to drive backwards
during the forklift, and arrange for special supervision and command to prevent bumping into people
or items causing personal injury or damage to the modules.
At the project site, the forklift should be driven at a controlled speed of
≤ 5 km/h in straight, and ≤ 3
km/h for turning.
The loading dock should be as the same height as the underside of the carrier.
Please also pay attention to the following precautions when unloading (taking vertical portrait
packages as an example).
Recommend to secure the module
package to the forklift with a belt,
transport
horizontally
with
no
person standing on either side.
Prevent collision on the
top when unloading from
the container.
No tilting storage.
No collision on the module glass.
Control the speed to prevent
tipping.
