3
MANUAL
| AU PRE TRIODE LAB
CANADA
http://www.triodelab.com
QUICK CONNECTIONS:
1. Plug in all tubes at correct locations and make sure it fits in tight and
completely
2. Hook up all interconnect cables from your source output (Red/White RCA
cables from CD Player, DVD Player, Tuner, Radio, TV...etc ) to preamplifier’s
INPUTS
3. Connect preampflier’s PREOUT to power amplifier’s INPUT
4. Insert POWERCORD and switch on preamplifier
5. After all tubes lit up, wait 30-60 seconds and turn on power amplifier (Once
finish listening, always TURN OFF Power Amplifier FIRST, and turn off preamplifier
last)
6. Select your source via SELECTOR SWITCH KNOB
7. Turn on to appropriate / suitable VOLUME CONTROL KNOB
8. Sit back, relax and enjoy!