Specifications
M2500
M3000
M6000
Standard Specifications for Each Unit
Cabinet
16 and 18 gauge galvanized steel
Finish
Pearl white epoxy, baked on, oil resistant
Air Flow
Horizontal — right to left or left to right, optional side discharge (M3000 & M6000)
Filter Access
Hinged doors — M3000 & M6000. End loading — M2500.
Drain
Prefilter & main filter drain (M2500 - no drain)
Plenum
Source capture with inlet collar (14" or 20" dia.), with no hole, dual arm (M3000 & M6000 only)
Agency Approvals
UL Listed Components
*secondary filter typically used with HEPA and Adsorber Modules
Dimensions
47" L x 25" W x 25" H
68" L x 25" W x 26.25" H
73.5" L x 49" W x 30" H
Installation
Suspended, Wall or Frame Mounted
Weight
180 lbs./Shipping 250 lbs.
260 Lbs./Shipping 330 lbs.
610 Lbs./700 lbs.
Electrical:
.75HP: 120VAC/60/1ph
2 HP: 208-240/480/60/3ph
7.5 HP: 208-240/480/60/3ph
Standard
10.5 Amps
5.8/2.9 Amps
19.8/9.9 Amps
Optional
N/A
2 HP: 575/60/3ph
5HP: 208-230/460/60/3ph
3 HP: 208-240/480/60/3ph-9.1/4.6 Amps
13.4/6.7 Amps
3 HP: 575/60/3ph
5 HP: 575/60/3ph
7.5 HP: 575/60/3ph
Motors:
Thermally protected
TEFC, Ball Bearings
TEFC, Ball bearings
Standard
1740 RPM (standard); 3450 RPM (optional)
1740 RPM (standard); 3450 RPM (optional)
Blowers:
Direct drive, forward curved
Belt drive, forward curved
Belt drive, forward curved
Standard
Optional
N/A
Belt drive, backward inclined,
N/A
airfoil, 3HP high static
Air Volume
1240-2010
1300-3300 (factory set 3000)
3500-7100 (factory set 6000)
(CFM)
Throw distance: 70 ft.
Throw distance: 80 ft.
Controls
3-speed selector switch
Motor starter (optional)
Motor starter (optional)
Sound Rating
50-70 dB @ 5 ft.
74 dB @ 5 ft.
80 dB @ 5 ft.
Filters:
Pre
4 inch 35% pleated (standard)
4 inch 35% pleated (standard)
2 ea. 4 inch 35% pleated (standard)
Polyester pad (optional)
2 inch aluminum mesh (optional)
2 ea. 2 inch aluminum mesh (optional)
3-way wrap around (optional)
2 inch impinger (optional)
2 ea. 2 inch impinger (optional)
3 way wrap around (optional)
Primary
95% Bag filter (standard)
95% bag filter (standard)
2 ea. 95% bag filter (standard)
65% Bag filter (optional)
65-95% extended surface (optional)
2 ea. 65-95% extended surface (optional)
99.97% HEPA (optional)*
2 ea.99.97% HEPA (optional)*
2 ea. Adsorber Modules (optional)*
4 ea. Adsorber Modules (optional)*
(25 lbs. carbon each)
(25 lbs. carbon each)
Secondary
N/A
95% short bag (optional)*
2 ea. 95% short bag (optional)*
Gauge Kit (Optional)
Manometer or Magnehelic to indicate when filters need changing
Silencer (Optional)
NA
Reduces sound to 72.5 dB.
Reduces sound to 78 dB.
