I.
INSTALLATION
Note: The ELIMINATOR’s Filter Unit is completely assembled at the factory with the
exception of the prefilter, optional ¼” (0.64 cm)-20 eyebolts, and the “tee” bar gasketing
that are used when hanging the unit from an overhead structure.
Step 1A.
Store units on 4’ side until ready to install, to prevent damage to the motor
vibration grommets.
Step 1B.
Carefully remove the unit from the shipping carton and inspect for any
damage that may have occurred during transportation. (see Figure 1)
Figure 1
ELIMINATOR OWNER’S MANUAL
Page 2
