The front wheel suspension is
removable to simplify trans-
portation of the Veloped.
1. Press the black button under
the front hinge to release the
front wheel suspension.
2. To remove the entire wheel
suspension, lift the frames
front end from the surface
while pulling the wheel sus-
pension downwards.
3. To install the front wheel
suspension, lift the front end
of the frame, press the black
button and push the wheel
axle into the axle hole placed
under the frame. Release the
black push button. Check that
the front wheel suspension is
secured by lifting the front end
of the frame from the ground
and then pulling the wheel sus-
pension downwards.
Removing/Installing the Front Wheel
Air Pressure
Check the tire air pressure reg-
ularly. Trionic recommends a
1.5 – 2.0 bar tire pressure.
Maximum tire air pressure is
2.5 bar/35 psi.
Summary of Contents for Veloped 12er L
Page 1: ...User Manual English...
